Whiteline Rear ARB setting?

[Smee]

hello

i got me a Whiteline ARB going on Next week (Hopefully) with my AP Coilovers

just want your input on what setting to have it on

i was thinking of putting it on the stiffest setting and leaving it.

but is this to much for road use?

what are your thoughts?

 

[AwesomeSarah]

Hi
Mine is on the middle setting at the moment
But as i have the front one on now , I have been told to put it on the max
So I would have thought that maybe the middle setting to start with , then move up if you are happy to do so????
Oooh , have fun!!!!
Sarah

 

[NickLCR]

Stiff all the way Got mine on stiff, just get it done, anything to make it handle better on the road is a plus mate

 

[Smee]

Stiff does sound the simpliest as i would never have to change it

but then Norfolk isnt the nicest place when it comes to roads unless you have a horse and cart

Smee

 

[Aimez]

I have mine of stiffest setting and wouldn't change it. But it's not hard to change so you can do.

 

[kriso]

I have mine on the stiffest setting but it does made the ride a bit uncomfortable. The Cupra suspension is stiff enough as it is! It's easy enough to change it when ever you want.

You get less body roll the stiffer it is, but worse grip. It's a compromise

 

[Damoegan]

Stop being a wimp and get it straight on the stiffest setting. You will never go back to any other setting if you do

 

[DIFT]

Stop being a wimp and get it straight on the stiffest setting. You will never go back to any other setting if you do

I decided medium was perfect for the road :gay:

Really is a nice little setup with the Ap coilovers.

 

[Damoegan]

I decided medium was perfect for the road :gay:

Really is a nice little setup with the Ap coilovers.

Get it on the stiffest setting and stop being :gay: dude, you will notice the difference

 

[DIFT]

Had it on the stiffest for a good few miles. roads are a bit poo round my way, so was a touch harsh.

Medium is fine.

Stiffest if for trackdays only... for me anyway

 

[ljpacey]

wont it understeer if you put in on the stiffest setting?

 

[Damoegan]

wont it understeer if you put in on the stiffest setting?

It reduces it.

 

[kriso]

wont it understeer if you put in on the stiffest setting?

It was a front ARB then yea, you get lift-off oversteer with stiffest setting on rear

 

[Gooner_Mike]

Stick it on the stiffest mate. I had mine on medium at first and went to stiffest soon after. There isn't loads of difference between the two settings as JUST HAVING the ARB makes so much difference anyway!!