where can you buy discs for cupra r brembos?

[mitch2028]

im struggling to find anywhere that sells 305mm discs....i know you can get them from seat but would like some drilled/grooved ones. Id really like black diamond ones but doubt theyd do them as im going to refurd/repaint my callipers black with white porsche logos

 

[MIkey kc]

had alook on ebay?

 

[ibizacupra]

how about some eliptically grooved disks ?

£85+vat each
picture shows 280mm ibiza cupra disks, but groove is the same on the 305's

 

[-pseudonymous-]

Was going to say try Bill. Been running these on my brembos for the last 4 months and would highly recommend. Easy on the eye too

 

[Danjw]

how about some eliptically grooved disks ?

£85+vat each
picture shows 280mm ibiza cupra disks, but groove is the same on the 305's

Whats the price for the 280s as pictured above please Bill?

 

[Mat]

what's the difference between those and "normal" grooved discs Bill?

 

[ibizacupra]

what's the difference between those and "normal" grooved discs Bill?

quieter running in the main, whilst still working as grooved disks.
machiend with radius nose cutter to no sharpe edges, they do not break out of the disk face to an edge, and combined will be less likely to ever crack unlike grooved which break out to the edges and are machined with square cutters. sharp edges are stress risers.

 

[ibizacupra]

Whats the price for the 280s as pictured above please Bill?

£125/pair for 280's +carriage+vat

 

[mitch2028]

I had tried ebay yeah but it didnt have much to offer apart from one set of grooved. Thanks for that bill thats a very reasonable price but have you got anything else? drilled and grooved maybe? or is that all you carry?

 

[ibizacupra]

I do not offer anything drilled.. they crack so I avoid touching them

 

[Prebs]

I can also recomend these disk, bougt them togeter with the brembo´s from bill two years ago and they still looks new!!!!!

Prebs

 

[danielc16]

bill might have to get the 305 disk of you after new year

 

[ibizacupra]

no worries..

 

[Mat]

bill, would you be apply to supply a big brake set up? (about 312) and if so how much?

Or is it a case that I have to find the parts myself???

Am I right in thinking that the usual option is to go down the route of porsche brakes?

 

[Mat]

goin slightly off topic, does anyone have a link to the big brake conversion guide? can't find it

 

[danielc16]

Mat @ SWS big brake conv is easy just need the right parts

 

[Mat]

I know it's supposed to be easy. But you're talking to someone who has no mechanical knowledge (but willing to learn). Just after the guide for it - which I think also includes parts required

 

[shantybeater]

mitch i'd recommend getting the discs bill recommended...the ferodo pads that will be sitting on them came from him and they are awesome! (incase you hadnt noticed!)

 

[ibizacupra]

bill, would you be apply to supply a big brake set up? (about 312) and if so how much?

Or is it a case that I have to find the parts myself???

Am I right in thinking that the usual option is to go down the route of porsche brakes?

305mm with brembos. is £840, needs 16" minimum diameter wheels and 38mm caliper clearance for wheel spokes. no good for std wheels

 

[Mat]

running 17" wheels and 20mm spacers (front and rear)