-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
mike.c1979
Guest
What do you think of these?
Seem ok and cheap enough
http://cgi.ebay.com/ebaymotors/HID-...62QQcategoryZ36476QQihZ022QQitemZ350082125579
Seem ok and cheap enough
http://cgi.ebay.com/ebaymotors/HID-...62QQcategoryZ36476QQihZ022QQitemZ350082125579
mike.c1979
Guest
Mine are like these
http://cgi.ebay.com/ebaymotors/XENO...hash=item330253915740&_trksid=p3286.m14.l1318
ballasts are tiny, makes it easier to hide them away.
mike.c1979
Guest
Thats a hefty delivery cost Lee haha.
I have had a look where the ballasts could go, and think there is quite a bit of room on the plateaus just under the headlights.
Is 6000k the colour to go for????
I have had a look where the ballasts could go, and think there is quite a bit of room on the plateaus just under the headlights.
Is 6000k the colour to go for????
You would get away with 4300k looking white on a projector lens ... 6000k will look blue .. i have 6000k in dipped and 4300k in main beam 
True was first i found just to show the difference in ballasts.
Never had the bumper off to see what room is available so makes sense to get the cheaper if room.
I use 8000k in mine.
mike.c1979
Guest
Yeah Im after the bright white but dont mind a bit of a blue tint to it. Just want the angel eyes to live up to their potential
Slight colour difference between dipped ( the outer lights) and main ( the inner lights) it's not a huge difference though. HID is a much brighter light than halogen. Projector lenses are what give the light a blue tint ... 8000k in normal lights is probably the same as 6000k in projectors.
Slight colour difference between dipped ( the outer lights) and main ( the inner lights) it's not a huge difference though. HID is a much brighter light than halogen. Projector lenses are what give the light a blue tint ... 8000k in normal lights is probably the same as 6000k in projectors.
Top modding
mike.c1979
Guest
I dont think there will be a huge difference betweek 4300 and 6000k so will just have a look for a H1 kit.
Honestly Lee ... never again, i love the end result but it took AGES. Projectors + HID for main beam are amazing, it's like driving around with football floodlights on the front of the car.
Yeah seen your photobucket regarding it all, i wouldn't do it for sure and i'm not one to back out of modding tbh.
I had HIDs in the highs on my "regular" angel eyes and they were good, but yours must be immense!
I had HIDs in the highs on my "regular" angel eyes and they were good, but yours must be immense!
mike.c1979
Guest
Im just looking at a kit on ebay and trying to figure out the wiring.
The ballasts have obviously got the wires that connect to the HID bulbs.
Am I right in assuming that the ballasts will be connected to each other via a wire, then wired to a power source?
On each ballast there looks like there is a port for a plug/wire.
The ballasts have obviously got the wires that connect to the HID bulbs.
Am I right in assuming that the ballasts will be connected to each other via a wire, then wired to a power source?
On each ballast there looks like there is a port for a plug/wire.
Similar threads
