Anyone changed their seats?

Jamesemt

Full Member
Oct 10, 2004
149
0
Hull
The one thing that I really dislike about my car is the crap seats.

Has anyone ever changed a front set? How easy is it to get the runners off?

I fancy getting some Impreza seats retrimmed and then fitting them - the standard seats don't really hold you...

Are Cupra R seats much different to a TDI Cupra's? I'm presuming the petrol Cupra is pretty much identical to mine??
 

T. Spark

Guest
Your also right, the TDi and 20vt have the same interior, same seats etc!

Cant help on the questions front im afriad, but if you ever want to sell ur seats, im first inline :D

hehe!
 

Ad Lav

vRS...
Nov 10, 2006
4,230
1
Kent
There's a little wire with a clip, just unplug it!
The trimming guy that did mine didn't have to disable the airbag as they were going back in, he said just don't turn the ignition on and the car won't know they're gone :D

You'd probably lose the side airbags with aftermarket seats, unless you got OEM replacement recaro's that have side airbags.

Mine could do with being a bit bulkier.
 

Bunnin

Stealth machine
Something i really wanna change in my car is the seat ! but always seems to be a lot of concern about what to do.

Maybe a group buy with some opinions from a well known company would be a good idea:think:

Im sure theres a few on the forum who would be up for that?
 
Last edited:

T. Spark

Guest
Something i really wanna change in my car is the seat ! but always seems to be a lot of concern about what to do.

Maybe a group buy with some opinions from a well known company would be a good idea:think:

Im sure theres a few on there forum who would be up for that?

Thats a good idea, lots of people now own mk4's! Fancy setting one up :p
 

davidol

New ghetto whip :)
Aug 17, 2004
1,978
0
Cardiff
with regards to the airbag sensing just measure the resistance across the wires underneath the seats and then match this with resistors, ideally built up to handle around 30w's, that should be more than enough!
 

BeEzA

Full Member
Oct 3, 2005
109
0
Irvine, Scotland
ive fitted rage race seats into mine... was bloody hellish trying to get subframes for it so ended up making my own from some angle iron and a welder :p the sliders then just bolt straight onto the subframe (due to the customness) and the chair bolts str8 onto the slider :) doddle.
 

Icecavern

Active Member
Jun 12, 2001
6,214
4
Berkshire, UK
www.icecavern.com
with regards to the airbag sensing just measure the resistance across the wires underneath the seats and then match this with resistors, ideally built up to handle around 30w's, that should be more than enough!

Which wires though? Aren't there more than 2? I never actually took that much notice when I had the seats out TBH.
 

Nath.

The Gentlemans Express
Jan 1, 2006
8,620
16
EASTLEIGH, HAMPSHIRE
with regards to the airbag sensing just measure the resistance across the wires underneath the seats and then match this with resistors, ideally built up to handle around 30w's, that should be more than enough!

resistors.........30w's..............who taught you ohms law the chuckle brothers? :whistle:
 

Jamesemt

Full Member
Oct 10, 2004
149
0
Hull
This could be a load of old tosh, but in my old Impreza with airbag seats, all you had to do was tape a resistor across the two pins on the plug...

So who's up for starting a group buy??:D
 

Nath.

The Gentlemans Express
Jan 1, 2006
8,620
16
EASTLEIGH, HAMPSHIRE
yup 180 is plenty, don't forget its only a polo platform

if you want 225 from the factory get a leon cupra r

BTW the top spec new leon is badged cupra too

think the r was dropped cos of honda getting the hump

heaven forgive me not to mention the fact that the ibiza cupra also comes with a 165 hp tdi with about a million torque thingys
 
Last edited:

T. Spark

Guest
Really???Why not??!! So is the 20vt Cupra considered the top model with 180bhp?

As said yuppy, the R was dropped at the last minute, thats why alot of the promo pics have a Cupra R reg plate!

The Cupra TDi and 20vt are the besr of the best in the Ibiza MK4 world (well best out of the factory :p)
 

rashcupra

MV AGUSTA & 1.8T DUB MK4
Oct 15, 2006
6,517
2
crawley
you dont want to be fidling around and modifying with airbags sensors and connectors under the seats as this could be life threatning. as for welding your on subfrme for your seats i hope you welds are strong enough to cope with a dramaticle amout of force from a front end accident (worst case senario) if the seat goes with you throu the windscreen! airbags are best left alone imo!
 

Bunnin

Stealth machine
you dont want to be fidling around and modifying with airbags sensors and connectors under the seats as this could be life threatning. as for welding your on subfrme for your seats i hope you welds are strong enough to cope with a dramaticle amout of force from a front end accident (worst case senario) if the seat goes with you throu the windscreen! airbags are best left alone imo!


Its a harsh point but true pal.

Theres gonna be pro and cons to most mods, and lots of people upgrade there seat. Just seems like the ibiza 1's r a pain in the arse.

However really wanna get something goin ! i love the new seat's in the new Lcr's, something along those lines would be awesome.
 
Genuine SEAT Parts and Accessories.