vngtx
Guest
Firstly you will need:
13mm spanner
10mm spanner
16mm spanner
17mm spanner
5mm allen key socket
8mm allen key socket
1/2" ratchet
3/8" ratchet
Hydraulic jack or engine support
Step 1 : Take positive battery terminal off with 10mm spanner.
Step 2 : Undo 13mm nut under the wiring holder ontop of the starter motor.
Step 3 : Support engine.
Step 4 : Undo 13mm nut for power steering bracket support on bottom starter motor bolt
Step 5 : Undo both top and bottom starter motor bolts with 16mm spanner and 3rd bottom bolt with 17mm spanner (may be 16mm)
Step 6 : Push starter motor out of way of engine
Step 7 : With 8mm allen key socket on 1/2" ratched, undo bottom engine mount bolt on subframe
Step 8 : Remove bottom half of front mounting and jack engine until you can move the top half of the mounting to the side
Step 9 : with 5mm allen key undo the bolt to the top right of crank sensor.
Step 10 : Turn sensor left to right while pulling to remove. Unplug wire.
Step 11 : Rebuild in reverse order. Must align starter motor bolts up with mounting using jack to fit it back on.
13mm spanner
10mm spanner
16mm spanner
17mm spanner
5mm allen key socket
8mm allen key socket
1/2" ratchet
3/8" ratchet
Hydraulic jack or engine support
Step 1 : Take positive battery terminal off with 10mm spanner.
Step 2 : Undo 13mm nut under the wiring holder ontop of the starter motor.
Step 3 : Support engine.
Step 4 : Undo 13mm nut for power steering bracket support on bottom starter motor bolt
Step 5 : Undo both top and bottom starter motor bolts with 16mm spanner and 3rd bottom bolt with 17mm spanner (may be 16mm)
Step 6 : Push starter motor out of way of engine
Step 7 : With 8mm allen key socket on 1/2" ratched, undo bottom engine mount bolt on subframe
Step 8 : Remove bottom half of front mounting and jack engine until you can move the top half of the mounting to the side
Step 9 : with 5mm allen key undo the bolt to the top right of crank sensor.
Step 10 : Turn sensor left to right while pulling to remove. Unplug wire.
Step 11 : Rebuild in reverse order. Must align starter motor bolts up with mounting using jack to fit it back on.